Whether you’re recording in the studio or performing on stage, the MG100HCFX provides the sound you need to stand out from the crowd. This 100W combo boasts a range of tonal options including four channels and a gain control, so you can explore clean, crunch and everything in between.
Bass Amplifiers
Marshall MG100HCFX Head W/ MX412B Speaker Cabinet
CHOOSE YOUR TONE
Easily recall your favourite tones with the footswitchable clean, crunch, OD1 and OD2 channels.
DIGITAL GENIUS
Experiment with a full set of digital FX including: spring and studio reverb, chorus, phaser, flanger, vibe, octave and four types of delay.
SWITCH IT UP
Do more with your sound with the damping switch and change between a classic amp feeling or a modern response.
DOWNLOAD YOUR MANUAL
TECHNICAL SPECIFICATION
GENERAL
Technology
Solid State
Channels
4 (store and recall)
ELECTRONICS
Output wattage
100W
Outputs
Speaker output: 1 x 1/4″ jack (min. 4Ω load), 1 x 3.5mm jack headphone out
Inputs
1 x 1/4″ jack instrument input, 1 x 3.5mm Aux in (on rear)
Controls
Gain, Clean/crunch, Bass, OD1/OD2, Middle, Treble, Reverb, Volume, FX (Chorus / Phaser / Flanger / Vibe), Tap, Delay (Hi-fi / Tape / Multi / Reverse), Ext. FX Master, Damping (Manual), Store, Tuner
Effects
Reverb, Phaser, Flanger, Vibe, Delay, Chorus
Effects loop
Yes, Send/Return
₦400,000.00 ₦450,000.00
brands | Marshall |
---|
Based on 0 reviews
0.0 overall
0
0
0
0
0
Be the first to review “Marshall MG100HCFX Head W/ MX412B Speaker Cabinet” Cancel reply
Related products
-
Combo, Guitar Effects/Pedals
MARSHALL MG102CFX LEAD COMBO W/PEDAL
0 out of 5(0)TECHNICAL SPECIFICATION
GENERAL
TechnologySolid StateChannels4 (store and recall)ELECTRONICS
Output wattage100WOutputsSpeaker output: 1 x 1/4″ jack (min. 4Ω load), 1 x 3.5mm jack headphone outInputs1 x 1/4″ jack instrument input, 1 x 3.5mm Aux in (on rear)ControlsGain, Clean/crunch, Bass, OD1/OD2, Middle, Treble, Reverb, Volume, FX (Chorus / Phaser / Flanger / Vibe), Tap, Delay (Hi-fi / Tape / Multi / Reverse), Ext. FX, Master, Damping (Manual), Store, TunerEffectsReverb, Phaser, Flanger, Vibe, Delay, ChorusEffects loopYes, Send/ReturnSPEAKERS
Speaker configuration2 x 12″Unit impedance4ΩACCESSORIES
FootswitchPEDL-90010 included, PEDL-90008 sold separatelyCableDetachable power cable includedDIMENSIONS (INCLUDING FEET AND HANDLE)
Weight23 kg / 50.6 lbsWidth675mm / 26.5″Height500mm /19.7″Depth260mm / 10.2″SKU: LC0005 -
Bass Amplifiers
HARTKE TX600 AND VX410
0 out of 5(0)- 600-watt Class D bass amplifier that weighs 7lb
- Classic 12AX7 Class A tube preamp circuitry
- Tone stack EQ section including Shape, Frequency, Bass and Treble controls
- Compressor knob controls bass dynamics
- Brite button for increased high frequency attack
- 1/4″ Active and Passive inputs
- 1/8″ Aux input
- 1/8″ headphone output
- Balanced XLR direct output
- Output Mute switch
- Integrated carry handle
- Rugged anodized aluminum chassis
Specifications
- Rated Output Power: 600 watts @ 4 ohms, 450 watts @ 8 ohms
- Frequency Response: 10Hz – 40kHz -1dB
- Preamp: Tube Low Noise 12AX7A High-Mu Twin Triode
- Active Input: >1MΩ unbalanced, -10dBV, -8dBu
- Passive Input: >1MΩ unbalanced, -20dBV, -18dBu
- Compressor Ratio: Fixed 2.1
- Compressor Threshold: Off to -30dBu Passive Input, Off to -20dBu Active Input
- Mute: >80dB (100dB typical) at Direct Output & Speaker Output
- Brite Switch: 10kH, +8dB Gain @ 2 o’clock; +5dB Gain @ min
- Tone Stack EQ
- Bass +8/-14dB, 80 Hz relative to 12 o’clock
- Shape +11/-3dB relative to 12 o’clock
- Frequency 200Hz to 800Hz
- Treble +5/-20dB, 6kHz relative to 12 o’clock
- Preamp Output: 100Ω unbalanced 0dBu
- Power Amp: In 20kΩ balanced, 0dBu for Rated Output Power (+14dBu max input)
- Direct Output: 125Ω balanced
- Stereo Aux Input: 3kΩ unbalanced, 10dBV
- Phones: 80mW max, shuts off Direct Output & Speaker Output
- Dimensions: 14” x 10.6” x 2.6” / 355mm x 270mm x 66mm
- Weight: 7 lb / 3.2 kg
SKU: HE0011 -
Accessories, Combo
Marshall dsl40c Lead Combo W/PEDAL
Rated 5.00 out of 5(1)TECHNICAL SPECIFICATION
GENERAL
ModelDSL40CRRangeDSLTechnologyValveChannels2 (Split) “Ultra gain” and “classic gain”ELECTRONICS
Output wattage40W (with power reduction option to 20W)OutputsSpeaker outputs: 5 x 1/4″ jack sockets (16Ω load / 8Ω load / 4Ω load), 1 x 1/4″ jack emulated line outInputs1 x 1/4″ instrument jack, 1 x 3.5mm jack Aux in MIDI in, footswitchControlsClassic gain channel (gain, volume, clean crunch switch), ultra gain channel (gain, volume, OD1/OD2 switch), treble, middle, bass, tone shift switch, presence, resonance, reverb (classic gain channel), reverb (ultra gain channel), master select switch, master volume I, master volume II, loop on/off switch, low power option (on rear)EffectsDigital reverbEffects loopYes, series, send/returnSPEAKERS
Speaker configuration1×12″Speaker modelCelestion V-Type speaker (16Ω, 80w)Unit impedance16ΩVALVES
Preamp valves4 x ECC83Power amp valves2 x EL34ACCESSORIES
FootswitchPEDL-90012 included. Compatible with PEDL-91016 modes include: 1 – Clean (classic green) 2 – Crunch (classic red) 3 – OD1 (ultra green) 4 – OD2 (ultra red) 5 – Master 1/Master 2 (toggle) 6 – FX Loop on/offCableDetachable power cable includedDust coverM-COVR-00116 (sold separately)SKU: LC0002 -
Bass Amplifiers
HARTKE HD150 – Bass Combo
0 out of 5(0)- 150 watts of output power
- 15″ HyDrive paper and aluminum cone driver
- 1″ tweeter
- Top-mounted amplifier with Volume, Bass, Mid and Treble controls
- 7-band graphic EQ
- 1⁄4″ input for active and passive bass guitars
- 1/8″ stereo Aux input for stereo line level devices (MP3 players, drum machines, etc.)
- 1⁄4″ headphone output
- XLR direct output
- Built-in limiter
- Effects loop
- Perforated metal grille
- Side carry handles
- Casters included
SKU: HE0005
There are no reviews yet.