The KP-3 Single Piano-Style Footswitch Pedal from Kurzweil is a dual-wired, normally open or normally closed foot pedal for keyboards. It can be used as a sustain pedal for pianos, synthesizers, and other keyboards that offer a 1/4″ (TS) footswitch pedal input jack. The KP-3 pedal is equipped with a user-selectable toggle switch to change polarity for any keyboard.
₦20,000.00 ₦30,000.00
| brands | Kurzweil |
|---|
SPS4-8 OVERVIEW |
For those who prefer the variety of SP4 series quality sounds and MIDI controller features in a more attractive cabinet with built-in sound system, the SPS4-8 is just right. The new graded-hammer keyboard action and integrated yet separable stand (sold separately) combine the best features of a floor-standing digital piano and a pro-quality portable stage piano.
All specifications subject to change without notice.
SPECS |
All specifications subject to change without notice.
| Keyboard: | 88-note, graded-hammer action (LK40GH) |
| Display: | 16 character LCD w/ front-panel contrast adjust |
| Polyphony: | 64 Voice Polyphony, dynamically allocated |
| Multitimbral: | 16 parts (one per MIDI channel) |
| Quick Split/Layer: | Easy access with adjustable relative volume (up to 4 zones) |
| Factory Presets: | 128 (taken from the acclaimed PC3 sound set, including select KB3 organs and KVA synths) |
| User Presets: | 64 |
| Factory MIDI Setups: | 64 |
| User MIDI Setups: | 64 (with 4 programmable zones for splits and layers) |
| Effects: | Dozens of complex effect chains taken from the PC3, with everything from concert hall reverbs to amplifier simulations and rotary effects |
| Controllers: | Pitch ribbon, modulation slider, 1 front panel knob, 1 switch-pedal input (supports optional, dual-pedal), 1 continuous control pedal input |
| Analog Outputs: | Two 1/4″ balanced TRS analog (24-bit DACs) |
| Analog Inputs: | Two 1/4″ balanced TRS inputs; mix into speaker system |
| Sound System: | Stereo 19W/channel @ <1% THD+N; 48W maximum total power
Two 4 x 6″ woofers (in ported enclosure) Two 1” neodynium magnet dome tweeters |
| Headphones: | 2 front-mounted 1/4″ outputs |
| MIDI: | In, Out |
| USB: | Complete MIDI functionality over USB
User program/setup file transfer to/from PC/Mac Operating System updates from PC/Mac |
| FREE OS Updates: | OS updates over USB |
| FREE Sounds: | The SP4 can also load programs created on our PC3 and PC3LE series keyboards (*within the limits of the SP4’s DSP resources). Additional sounds are also available for download on our website (loaded over USB) |
| Included Accessories: | Power cable, Switch pedal, USB cable, (4) self adhesive feet |
| Height: | (4.5″) (11.43cm) |
| Depth: | (14.5″) (36.83cm) |
| Length: | (51.75″) (131.45) |
| Weight: | (41 lb.) (18.6 kg) |
| Power: | 90-250V free voltage external power supply (19VDC, 3.42A) |
SPECS |
All specifications subject to change without notice.
| Keyboard: | 76-Note, synth action with touch sensitive keys |
| Keyboard Sensitivity: | 6 selectable response levels |
| Display: | Multi-functional LCD |
| Polyphony: | 128 voice |
| Preset Programs: | 737 |
| User Presets: | 50 |
| Splits/Layers: | Yes |
| Transpose: | +/- 1 octave |
| Tune: | +/- 50 cents |
| General MIDI: | Yes |
| Effects: | Reverb (10 types) / Chorus (8 types) / EQ |
| Auto-Accompaniment Styles: | 240 |
| Recorder/Sequencer: | Yes (6 tracks / 10 user songs) |
| Metronome: | Yes |
| Sound System: | 40W, 4-speaker, stereo |
| Headphone: | (1) 1/4″ stereo headphone out |
| Pedal Ports: | 1 Sustain, 1 Volume (pedals sold separately) |
| Audio I/O: | Stereo 1/4″ In/Out |
| MIDI: | via USB |
| USB: | (2) ports; USB-MIDI and USB-device storage |
| Included Accessories: | music stand |
| Dimensions: | 6.4″(H) x 48.6″ (W) x 16.7″ (D)
16.2 cm (H) x 123.5 cm (W) x 42.3 cm (D) |
| Weight: | 25.4 lb / 11.5 Kg |
| Power: | 12VDC / 3A external power supply |
SPECS |
All specifications subject to change without notice.
| Keyboard: |
RPHA: Real Piano Hammer Action / 88-note, fully-weighted hammer-action with velocity and aftertouch sensitive adjustable keys
|
| Display: | 480 x 272 pixel high resolution color LCD with adjustable brightness |
| Polyphony: | 256 Voice Polyphony, dynamically allocated |
| Multitimbral: | 16 parts (one per MIDI channel) |
| Architecture: | Dynamic VAST: Powerful synthesis engine, with user programmable DSP algs and routing. More DSP power than even our K Series instruments. 6-Operator FM Engine VA1 Inside: anti-aliasing, power-shaped oscillators and DSP processing from Kurzweil’s VA1 concept synth, capable of delivering authentic analog emulations as well as incredibly complex new sounds. Cascade Mode: lets the user route one layer through the DSP of any other layer within a program – up to 32 consecutive layers deep! |
| Sample Flash Memory: | 2 GB of re-loadable, non-volatile, user flash memory |
| Factory Programs: | 1000+ |
| User Programs: | 4096 |
| Factory Multis: | 50+ – featuring up to 16 independent zones |
| User Multis: | 4096 |
| General MIDI: | No |
| Kurzweil String Resonance: | Yes |
| Master EQ/Compressor: | Yes |
| Effects: | Over 1000 complex effect chains, incorporated into programs featuring our award winning effects – reverbs, delays, chorus, flange, phaser, EQs, distortions, rotary speaker simulators, compressors, and more 32 total FX units |
| Controllers: | 1 pitch wheel 1 modulation wheel 9 front panel sliders 9 Knobs 9 switches (assignable/zone mutes/KB3 control) 1 variation switch Tempo Controls w/ tap tempo 2 transpose switches Arp Controls Transport Controls *2 switch pedal inputs each supporting single switch pedal or single half damper pedal (1 switch/sustain pedal is included; half-damper pedals sold separately) 2 continuous control pedal inputs monopressure (aftertouch) Ribbon input (ribbon controller sold separately) |
| Sequencer: | 16 Tracks; 960 PPQ resolution. Song editing functions include both event and track-based tools like quantize, swing, remap, controller scaling and more. |
| MIDI CC Step Sequencers: | 16 simultaneous |
| RIFFs: | 16-per Multi |
| Arpeggiators: | 1-per Program, 16-per Multi |
| Analog Outputs: | Four (2 pairs) 1/4″ balanced TRS analog (32-bit DACs) Automatic mono switching on main outs +21dBu maximum output 50Ω balanced source impedance |
| Audio Inputs: | Two 1/4″ inputs One stereo 1/8″ input (each with FX) for connecting your favorite MP3 player or other audio source for accompaniment playback |
| Headphones: | 1 back panel 1/4″ headphone output 130mW into 32 ohm headphones |
| MIDI: | In, Out |
| USB: | Two USB ports (one A port / one B port) Complete MIDI functionality over USB User program/multi file backup via USB drive Operating System updates via USB drive |
| Software Editors: | External editors for Mac OS X, Windows PC and iOS* devices (*coming soon) |
| FREE OS Updates: | OS updates via USB drive |
| Included Accessories: | Power cable, Switch pedal, USB cable |
| Height: | 6.5″ (16.51 cm) |
| Depth: | 14.75″ (37.46 cm) |
| Length: | 51.25″ (130.18 cm) |
| Weight: | 28.7 lb (13.01 kg) |
| Power: | External 15VDC 2.5A Power Supply |
SPECS |
All specifications subject to change without notice.
| Keyboard: | 88 Note fully weighted, hammer action with adjustable touch sensitive keys |
| Keyboard Sensitivity: | 4 selectable response levels |
| Display: | 3-character LED |
| Polyphony: | 128 voice |
| Preset Programs: | 20 Expressive sounds |
| General MIDI: | No |
| Splits/Layers: | Yes |
| Transpose: | Full transposition to any key, +/- one octave |
| Tune: | Adjust by Cents (+/- 100 cents) |
| Effects: | Reverb / Chorus / EQ (5 preset selections per effect) |
| Auto-Accompaniment Styles: | 50 pre-recorded interactive patterns in a variety of styles |
| Recorder/Sequencer: | 1-Track; 5 Song capacity |
| Demo Songs: | 60 |
| Sound System: | 60-watt, 4-speaker stereo sound system (peak music power) |
| Audio Outs: | Stereo 1/4″ line out (for connecting to external amplification) |
| Audio In: | Stereo 1/4″ line in (for connecting external sound sources) |
| Headphones: | (2) 1/4″ stereo headphone outs |
| MIDI I/O: | MIDI Out |
| USB: | (1) port; MIDI over USB for connecting to/from an external computer sequencer |
| Pedals: | 1 switch-pedal input (sustain pedal included). |
| Stand: | Optional stand with built in sustain/sostenuto/soft pedals
(sold separately) |
| Finishes: | Matte Black,, White |
| Included Accessories: | Power adaptor, (1) switch/sustain pedal, |
| Dimensions: | 5.4″(H) x 53.7″ (W) x 14.4″ (D)
13.7 cm (H) x 136.5 cm (W) x 36.6 cm (D) |
| Weight: | 27.1 lb / 12.3 Kg |
| Power: | DC 12V 2.0A external power supply |
There are no reviews yet.