BASS COMBO
Showing all 22 results
-
Bass Guitars
Cort A5 OPN Nat Artisan Series Bass Guitar 5 Strings
SPECIFICATIONS
CONSTRUCTION Neck-Thru BODY Swamp Ash w/ Spalted Maple Top NECK 5PCs Maple & Panga Panga BINDING Walnut FRETS 24 SCALE 35.5 ~ 34″ Fan Fret TUNERS Hipshot® Ultralite BRIDGE Single Hardtail PICKUPS Bartolini® MK-1 ELECTRONICS Bartolini® MK-1 HARDWARE Platinum STRINGS D’Addario® YB-XL 170-5SL ADDITIONAL *Hardcase Included SKU: CG0006 -
Guitars
CORT Action DLX V Plus
Specifications
CONSTRUCTION Bolt-On
CUTAWAY Double Cutaway
BODY Poplar Body w/ Quilted Maple Top
NECK Canadian Hard Maple
FRETBOARD Jatoba
400mm(15.75″) Radius
FRETS 24
SCALE 864mm (34″)
INLAY White Dots
TUNERS Die-cast Tuners
BRIDGE EB6(5) Bridge
PICKUPS PDX-5 Pickups
ELECTRONICS Markbass MB-1 EQ
HARDWARE Chrome Hardware
STRINGS 5 StringsSKU: CG0001 -
Guitars
Cort Artisan Series Bass Guitar A5 CUSTOM Z OPN
SPECIFICATION
- CONSTRUCTION: Neck-thru
- BODY: Zebra Wood Top & Back on Mahogany Body
- NECK: 5pc Maple & Wenge
- BINDING: N/A
- FRETBOARD: Rosewood, 15 3/4″ Radius (400mm)
- FRETS: 24/Large (2.7mm)
- SCALE: 34″ (864mm)
- INLAY: Abalone Dot with Black Circle
- TUNERS: Hipshot lic.
- BRIDGE: Hipshot Trans Tone Bridge (5)
- PICKUPS: Bartolini MK5CBC-B & MK5CBC-T
- ELECTRONICS: Bartolini MK-1 EQ / 1v, 1blend, 3band, EQ on-off switch
- HARDWARE: BN (Black Nickel)
- STRINGS: D’addario EXL170-5SL(130-045).
SKU: CG0005 -
Guitars
Cort EVL-K5 Electric Guitar
Cort EVL-K5 Electric Guitar
EMG HZ H4 Pickups
This powerful combination of passive pickups has the power of EMG’s active 81 with the soul of a passive PAF.
Double Locking Ⅲ Tremolo
The EVL K5 is equipped with a double locking Ⅲ tremolo for tuning stability and extreme tremolo action.
Rosewood Fingerboard with EVL Custom Inlay
EVL Custom inlay on the rosewood fingerboard makes the EVL-K5 total design awesome.
Cort EVL-K5 Specifications:
SKU: CG0002 -
Guitars
CORT GUITAR KX5 BLM
Specifications
CONSTRUCTION Bolt-On CUTAWAY Double Cutaway BODY Basswood Body w/ Binding NECK Canadian Hard Maple Neck FRETBOARD Rosewood Fingerboard FRETS 24 Frets SCALE 25.5″ INLAY Dot Inlay TUNERS Diecasting Tuners BRIDGE T.O.M Bridge w/ String-Thru Body PICKUPS Motherbucker MB-2F & MB-2R Pickups (H-H) HARDWARE BK(Black) Hardware SPECIAL Coil Tap Push Pull Switch SKU: CG0003 -
-
-
Bass Amplifiers
HARTKE 4.5XL – Bass Cabinet HA5500 AMP
- “Expanded-Design” Tuned, Ported Cabinet
- Custom Hartke 5″ Aluminum-Cone High-Frequency Driver
- Four Hartke XL 10″ Aluminum-Cone Bass Drivers
- Power Handling: 400 Watts @ 8 Ohms
- Frequency Response: 30 Hz To 12 kHz
- Sensitivity: 99 dB @ 1 W/1 M
- Voice Coil: 1.5″
- Magnet Weight: 60 Oz.
- Parallel 1/4″ Inputs
- Dimensions: 27″(H) X 24″(W) X 18″(D)
- Weight: 99 lb.
- 500 Watts of power at 4 ohms
- Tube and solid state preamp sections
- Passive and active input sections
- Bass, treble, and contour controls
- 10-band graphic EQ
- Variable compression
- XLR direct out
- Effects loop
- Rack Ears included
SKU: HE0008 -
Bass Amplifiers
HARTKE HA2500 BASS AMP AND BASS CABINET 410XL
- 250 watts at 4 ohms, 180 watts at 8 ohms
- Tube-emulation and solid-state preamp circuit
- 10-band graphic EQ
- High Pass and Low Pass contour knobs
- Built-in compressor
- Active and Passive inputs
- Protection relay circuitry
- Effects loop Send and Return jacks
- Unbalanced 1/4” Speaker Outputs
- Balanced Direct Out with Ground Lift and Pre/Post switches
- Rugged, roadworthy construction
- Dual-Chamber, Dual-Ported Cabinet
- Four Hartke XL 10″ Aluminum-Cone Bass Drivers
- Power Handling: 400 Watts @ 8 Ohms
- Frequency Response: 30 Hz To 5 kHz
- Sensitivity: 98 dB @ 1 W/1 M
- Voice Coil: 1.5″
- Magnet Weight: 60 Oz.
- Parallel 1/4″ Inputs
- Dimensions: 24″(H) X 24″(W) X 15″(D)
- Weight: 88 lb.
SKU: HE0004 -
-
Bass Amplifiers
HARTKE HD150 – Bass Combo
- 150 watts of output power
- 15″ HyDrive paper and aluminum cone driver
- 1″ tweeter
- Top-mounted amplifier with Volume, Bass, Mid and Treble controls
- 7-band graphic EQ
- 1⁄4″ input for active and passive bass guitars
- 1/8″ stereo Aux input for stereo line level devices (MP3 players, drum machines, etc.)
- 1⁄4″ headphone output
- XLR direct output
- Built-in limiter
- Effects loop
- Perforated metal grille
- Side carry handles
- Casters included
SKU: HE0005 -
Bass Amps, Combo
HARTKE HD508,500WATT , BASS COMBO
- Lightweight Class D combo amplifier that weighs 35lb
- 500 watts of power
- Two 10″ HyDrive paper/aluminum hybrid cone drivers
- Neodymium magnets
- Top-mounted control panel
- Hartke‘s Shape EQ knob with variable filter
- 3-band (Bass, Mid, Treble) EQ
- XLR direct output
- 1/8″ stereo Aux input
- 1⁄4″ headphone output
- 1⁄4″ bass input
- Effects loop
- Perforated steel grille
- Molded strap carry handle
SKU: HE0006 -
Bass Amplifiers
HARTKE HyDrive 210C – Combo Amplifier
- 2 x 10-inch 150 watt HyDrive neodymium hybrid cone driver
- 250 watts of power
- 1-inch titanium compression driver
- World-famous Hartke Shape EQ
- 7-band graphic EQ
- Bass and treble contour controls
- Variable compressor with LED indicator
- Hartke Bass Attack Overdrive
- XLR balanced direct output
- Effects loop
- RCA CD input
- Footswitch jack (Shape and Bass Attack)
- Solid plywood cabinet construction with durable vinyl covering
- Weight: 61.6 lbs
SKU: HE0013 -
Combo
HARTKE Kickback KB12 – Bass Combo
- Lightweight Class D amplifier that weighs 28lb
- 500 watts of power
- 12″ HyDrive paper/aluminum hybrid cone driver
- Neodymium magnets
- 2-way (upright and “kickback”) cabinet design
- Unique Shape EQ knob with variable filter
- Full 3-band EQ
- XLR direct output
- 1⁄4″ headphone output
- 1⁄4″ passive/active bass input
- Perforated steel grille
- Molded strap carry handle
SKU: HE0016 -
Combo
HARTKE Kickback KB15 – Bass Combo 120WATTS
- Lightweight Class D amplifier that weighs 35lb
- 500 watts of power
- 15″ HyDrive paper/aluminum hybrid cone driver
- Neodymium magnets
- 2-way (upright and “kickback”) cabinet design
- Unique Shape EQ knob with variable filter
- Full 3-band EQ
- XLR direct output
- 1⁄4″ headphone output
- 1⁄4″ passive/active bass input
- Perforated steel grille
- Molded strap carry handle
SKU: HE0015 -
Bass Amplifiers
HARTKE LH1000 – Bass Amplifier
- Dual Parallel mode offers 2 x 225 watts at 8 ohms, 2 x 320 watts at 4 ohms, 2 x 545 watts at 2 ohms
- Bridge mode offers 750 watts at 8 ohms, 1,100 watts at 4 ohms
- Classic 12AX7 Class A tube preamp circuit
- Bass and Treble shelving, Mid-peak EQ controls
- Selectable Brite and Limiter switch with LED indicator
- Balance control blends level of A and B outputs
- Front panel balanced XLR direct output
- Rear panel 1/4″ Effects loop
- 1/4″ and Twist & Lock output connectors
- 2-rackspace metal chassis with steel faceplate and handles
SKU: HE0002 -
Bass Amplifiers
HARTKE LH500 – Bass Amplifier
- 500 watts of power @ 4 ohms
- Classic 12AX7 High Voltage Class-A tube preamp circuit
- Bass and Treble Shelving, plus mid-peak EQ controls
- Selectable Brite switch for added high frequency response
- Selectable limiter switch with LED indicator
- Front panel XLR balanced direct output
- Rear panel 1/4″ effects loop
- 1/4″ output connectors
- 2-rackspace metal chassis with steel faceplate and handles
SKU: HE0009 -
Bass Amplifiers
HARTKE TX600 – Bass Amplifier
- 600-watt Class D bass amplifier that weighs 7lb
- Classic 12AX7 Class A tube preamp circuitry
- Tone stack EQ section including Shape, Frequency, Bass and Treble controls
- Compressor knob controls bass dynamics
- Brite button for increased high frequency attack
- 1/4″ Active and Passive inputs
- 1/8″ Aux input
- 1/8″ headphone output
- Balanced XLR direct output
- Output Mute switch
- Integrated carry handle
- Rugged anodized aluminum chassis
Specifications
- Rated Output Power: 600 watts @ 4 ohms, 450 watts @ 8 ohms
- Frequency Response: 10Hz – 40kHz -1dB
- Preamp: Tube Low Noise 12AX7A High-Mu Twin Triode
- Active Input: >1MΩ unbalanced, -10dBV, -8dBu
- Passive Input: >1MΩ unbalanced, -20dBV, -18dBu
- Compressor Ratio: Fixed 2.1
- Compressor Threshold: Off to -30dBu Passive Input, Off to -20dBu Active Input
- Mute: >80dB (100dB typical) at Direct Output & Speaker Output
- Brite Switch: 10kH, +8dB Gain @ 2 o’clock; +5dB Gain @ min
- Tone Stack EQ
- Bass +8/-14dB, 80 Hz relative to 12 o’clock
- Shape +11/-3dB relative to 12 o’clock
- Frequency 200Hz to 800Hz
- Treble +5/-20dB, 6kHz relative to 12 o’clock
- Preamp Output: 100Ω unbalanced 0dBu
- Power Amp: In 20kΩ balanced, 0dBu for Rated Output Power (+14dBu max input)
- Direct Output: 125Ω balanced
- Stereo Aux Input: 3kΩ unbalanced, 10dBV
- Phones: 80mW max, shuts off Direct Output & Speaker Output
- Dimensions: 14” x 10.6” x 2.6” / 355mm x 270mm x 66mm
- Weight: 7 lb / 3.2 kg
SKU: HE0001 -
Bass Amplifiers
HARTKE TX600 AND VX410
- 600-watt Class D bass amplifier that weighs 7lb
- Classic 12AX7 Class A tube preamp circuitry
- Tone stack EQ section including Shape, Frequency, Bass and Treble controls
- Compressor knob controls bass dynamics
- Brite button for increased high frequency attack
- 1/4″ Active and Passive inputs
- 1/8″ Aux input
- 1/8″ headphone output
- Balanced XLR direct output
- Output Mute switch
- Integrated carry handle
- Rugged anodized aluminum chassis
Specifications
- Rated Output Power: 600 watts @ 4 ohms, 450 watts @ 8 ohms
- Frequency Response: 10Hz – 40kHz -1dB
- Preamp: Tube Low Noise 12AX7A High-Mu Twin Triode
- Active Input: >1MΩ unbalanced, -10dBV, -8dBu
- Passive Input: >1MΩ unbalanced, -20dBV, -18dBu
- Compressor Ratio: Fixed 2.1
- Compressor Threshold: Off to -30dBu Passive Input, Off to -20dBu Active Input
- Mute: >80dB (100dB typical) at Direct Output & Speaker Output
- Brite Switch: 10kH, +8dB Gain @ 2 o’clock; +5dB Gain @ min
- Tone Stack EQ
- Bass +8/-14dB, 80 Hz relative to 12 o’clock
- Shape +11/-3dB relative to 12 o’clock
- Frequency 200Hz to 800Hz
- Treble +5/-20dB, 6kHz relative to 12 o’clock
- Preamp Output: 100Ω unbalanced 0dBu
- Power Amp: In 20kΩ balanced, 0dBu for Rated Output Power (+14dBu max input)
- Direct Output: 125Ω balanced
- Stereo Aux Input: 3kΩ unbalanced, 10dBV
- Phones: 80mW max, shuts off Direct Output & Speaker Output
- Dimensions: 14” x 10.6” x 2.6” / 355mm x 270mm x 66mm
- Weight: 7 lb / 3.2 kg
SKU: HE0011 -
Combo
HARTKE VX3500 – Bass Combo
- 3500 amplifier section with 350 watts delivered to its internal 4 ohm speaker system
- Amp section features tube and solid state preamps, bass, treble and contour controls, 10-band graphic EQ and variable compression
- Cabinet features 4 x 10″ traditional paper cone drivers and a high frequency compression driver
- Solid braced cabinet construction, recessed side handles, and heavy duty casters
SKU: HE0012
