Combo
Showing 1–24 of 36 results
-
Keyboard Amplifier
AH 300 KEYBOARD COMBO
The Laney AudioHub range is the swiss army knife of amplifiers, with flexible units that give consistency in performance and sound quality for a wide range of applications. The Audiohub is designed to have a flat balanced sound, amplifying the true tone of the instrument without colouring it. With a variety of input options including xlr, jack and RCA, the Audiohub can handle 2 independent channels, with the option to shape the tone with a 3-band EQ control. Keyboards, electric drums, vocals, acoustic and electric string instruments as well as audio/mp3 playback are all handled with ease. As added extras the Audiohub offers on board digital delay with feedback, time and level controls and an FX loop on the rear to ad character and depth to the sound. The Audio hub is a powerful and versatile unit, offering professional musicians the quality and power for their chosen instrument. The Audiohub is also a fantastic choice for schools, as it has the versatility to cater for the wide variety of musicians, instruments, events and classes that happen on a daily basis.
SKU: LY0008 -
-
Bass Amplifiers
HARTKE 4.5XL – Bass Cabinet HA5500 AMP
- “Expanded-Design” Tuned, Ported Cabinet
- Custom Hartke 5″ Aluminum-Cone High-Frequency Driver
- Four Hartke XL 10″ Aluminum-Cone Bass Drivers
- Power Handling: 400 Watts @ 8 Ohms
- Frequency Response: 30 Hz To 12 kHz
- Sensitivity: 99 dB @ 1 W/1 M
- Voice Coil: 1.5″
- Magnet Weight: 60 Oz.
- Parallel 1/4″ Inputs
- Dimensions: 27″(H) X 24″(W) X 18″(D)
- Weight: 99 lb.
- 500 Watts of power at 4 ohms
- Tube and solid state preamp sections
- Passive and active input sections
- Bass, treble, and contour controls
- 10-band graphic EQ
- Variable compression
- XLR direct out
- Effects loop
- Rack Ears included
SKU: HE0008 -
Bass Amplifiers
HARTKE HA2500 BASS AMP AND BASS CABINET 410XL
- 250 watts at 4 ohms, 180 watts at 8 ohms
- Tube-emulation and solid-state preamp circuit
- 10-band graphic EQ
- High Pass and Low Pass contour knobs
- Built-in compressor
- Active and Passive inputs
- Protection relay circuitry
- Effects loop Send and Return jacks
- Unbalanced 1/4” Speaker Outputs
- Balanced Direct Out with Ground Lift and Pre/Post switches
- Rugged, roadworthy construction
- Dual-Chamber, Dual-Ported Cabinet
- Four Hartke XL 10″ Aluminum-Cone Bass Drivers
- Power Handling: 400 Watts @ 8 Ohms
- Frequency Response: 30 Hz To 5 kHz
- Sensitivity: 98 dB @ 1 W/1 M
- Voice Coil: 1.5″
- Magnet Weight: 60 Oz.
- Parallel 1/4″ Inputs
- Dimensions: 24″(H) X 24″(W) X 15″(D)
- Weight: 88 lb.
SKU: HE0004 -
-
Bass Amplifiers
HARTKE HD150 – Bass Combo
- 150 watts of output power
- 15″ HyDrive paper and aluminum cone driver
- 1″ tweeter
- Top-mounted amplifier with Volume, Bass, Mid and Treble controls
- 7-band graphic EQ
- 1⁄4″ input for active and passive bass guitars
- 1/8″ stereo Aux input for stereo line level devices (MP3 players, drum machines, etc.)
- 1⁄4″ headphone output
- XLR direct output
- Built-in limiter
- Effects loop
- Perforated metal grille
- Side carry handles
- Casters included
SKU: HE0005 -
Bass Amps, Combo
HARTKE HD500 – Bass Combo
- Lightweight Class D combo amplifier that weighs 35lb
- 500 watts of power
- Two 10″ HyDrive paper/aluminum hybrid cone drivers
- Neodymium magnets
- Top-mounted control panel
- Hartke‘s Shape EQ knob with variable filter
- 3-band (Bass, Mid, Treble) EQ
- XLR direct output
- 1/8″ stereo Aux input
- 1⁄4″ headphone output
- 1⁄4″ bass input
- Effects loop
- Perforated steel grille
- Molded strap carry handle
SKU: HE0007 -
Bass Amps, Combo
HARTKE HD508,500WATT , BASS COMBO
- Lightweight Class D combo amplifier that weighs 35lb
- 500 watts of power
- Two 10″ HyDrive paper/aluminum hybrid cone drivers
- Neodymium magnets
- Top-mounted control panel
- Hartke‘s Shape EQ knob with variable filter
- 3-band (Bass, Mid, Treble) EQ
- XLR direct output
- 1/8″ stereo Aux input
- 1⁄4″ headphone output
- 1⁄4″ bass input
- Effects loop
- Perforated steel grille
- Molded strap carry handle
SKU: HE0006 -
Bass Amplifiers
HARTKE HyDrive 210C – Combo Amplifier
- 2 x 10-inch 150 watt HyDrive neodymium hybrid cone driver
- 250 watts of power
- 1-inch titanium compression driver
- World-famous Hartke Shape EQ
- 7-band graphic EQ
- Bass and treble contour controls
- Variable compressor with LED indicator
- Hartke Bass Attack Overdrive
- XLR balanced direct output
- Effects loop
- RCA CD input
- Footswitch jack (Shape and Bass Attack)
- Solid plywood cabinet construction with durable vinyl covering
- Weight: 61.6 lbs
SKU: HE0013 -
Combo
HARTKE Kickback KB12 – Bass Combo
- Lightweight Class D amplifier that weighs 28lb
- 500 watts of power
- 12″ HyDrive paper/aluminum hybrid cone driver
- Neodymium magnets
- 2-way (upright and “kickback”) cabinet design
- Unique Shape EQ knob with variable filter
- Full 3-band EQ
- XLR direct output
- 1⁄4″ headphone output
- 1⁄4″ passive/active bass input
- Perforated steel grille
- Molded strap carry handle
SKU: HE0016 -
Combo
HARTKE Kickback KB15 – Bass Combo 120WATTS
- Lightweight Class D amplifier that weighs 35lb
- 500 watts of power
- 15″ HyDrive paper/aluminum hybrid cone driver
- Neodymium magnets
- 2-way (upright and “kickback”) cabinet design
- Unique Shape EQ knob with variable filter
- Full 3-band EQ
- XLR direct output
- 1⁄4″ headphone output
- 1⁄4″ passive/active bass input
- Perforated steel grille
- Molded strap carry handle
SKU: HE0015 -
Bass Amplifiers
Hartke Kickback KB15 – Bass Combo 500WATTS
Kick-Drive.
Hartke has revamped its acclaimed Kickback 15 Bass Combo with a new high-powered, lightweight design. Retaining the classic enclosure, the Kickback KB15 now features Hartke‘s patented HyDrive Speaker Technology. With 500 watts of Class D power, the Kickback KB15 is ruggedly portable and delivers serious bass tone that cuts through the mix.
The HyDrive Design
The KB15’s 15″ HyDrive speaker features carefully crafted paper/aluminum hybrid cone drivers. The hybrid makeup delivers an exceptional blend of warmth and attack that can’t be attained by traditional all-paper bass speakers. The use of rare earth neodymium magnets also helps to maintain lightweight portability without sacrificing any of the legendary Hartke attack.
Shape Your Tone
Designed to produce a responsive bass tone that’s both tight and warm, the KB15 provides users with comprehensive tone control. Quickly dial in tone adjustments with the Shape knob and full 3-band EQ. When activated, the Shape knob selects the frequency range of a unique, fixed EQ curve, resulting in a greater variety of color and harmonics.
Kickback Versatility
Beyond sitting upright, the KB15 can be placed in “kickback” position for superior directionality and increased high-end clarity on stage. With a headphone output for home practice, an XLR direct output for live performance and a lightweight Class D amplifier, the KB15 is the answer for all bassists.
SKU: HE0015P -
Bass Amplifiers
HARTKE LH1000 – Bass Amplifier
- Dual Parallel mode offers 2 x 225 watts at 8 ohms, 2 x 320 watts at 4 ohms, 2 x 545 watts at 2 ohms
- Bridge mode offers 750 watts at 8 ohms, 1,100 watts at 4 ohms
- Classic 12AX7 Class A tube preamp circuit
- Bass and Treble shelving, Mid-peak EQ controls
- Selectable Brite and Limiter switch with LED indicator
- Balance control blends level of A and B outputs
- Front panel balanced XLR direct output
- Rear panel 1/4″ Effects loop
- 1/4″ and Twist & Lock output connectors
- 2-rackspace metal chassis with steel faceplate and handles
SKU: HE0002 -
Bass Amplifiers
HARTKE LH500 – Bass Amplifier
- 500 watts of power @ 4 ohms
- Classic 12AX7 High Voltage Class-A tube preamp circuit
- Bass and Treble Shelving, plus mid-peak EQ controls
- Selectable Brite switch for added high frequency response
- Selectable limiter switch with LED indicator
- Front panel XLR balanced direct output
- Rear panel 1/4″ effects loop
- 1/4″ output connectors
- 2-rackspace metal chassis with steel faceplate and handles
SKU: HE0009 -
Bass Amplifiers
HARTKE TX300AMP AND HX112 – Bass Amplifier
- 300-watt Class D bass amplifier that weighs 5lb
- Drive circuit for added distortion effect
- Variable compressor for increased dynamic control
- 3-band EQ with Shape control
- 1/4″ Instrument input
- 1/8″ (3.5mm) Aux input
- 1/8″ (3.5mm) Headphone output
- Balanced XLR direct output
- Output Mute switch
- Rugged anodized aluminum chassis
SKU: HE0010 -
Bass Amplifiers
HARTKE TX600 – Bass Amplifier
- 600-watt Class D bass amplifier that weighs 7lb
- Classic 12AX7 Class A tube preamp circuitry
- Tone stack EQ section including Shape, Frequency, Bass and Treble controls
- Compressor knob controls bass dynamics
- Brite button for increased high frequency attack
- 1/4″ Active and Passive inputs
- 1/8″ Aux input
- 1/8″ headphone output
- Balanced XLR direct output
- Output Mute switch
- Integrated carry handle
- Rugged anodized aluminum chassis
Specifications
- Rated Output Power: 600 watts @ 4 ohms, 450 watts @ 8 ohms
- Frequency Response: 10Hz – 40kHz -1dB
- Preamp: Tube Low Noise 12AX7A High-Mu Twin Triode
- Active Input: >1MΩ unbalanced, -10dBV, -8dBu
- Passive Input: >1MΩ unbalanced, -20dBV, -18dBu
- Compressor Ratio: Fixed 2.1
- Compressor Threshold: Off to -30dBu Passive Input, Off to -20dBu Active Input
- Mute: >80dB (100dB typical) at Direct Output & Speaker Output
- Brite Switch: 10kH, +8dB Gain @ 2 o’clock; +5dB Gain @ min
- Tone Stack EQ
- Bass +8/-14dB, 80 Hz relative to 12 o’clock
- Shape +11/-3dB relative to 12 o’clock
- Frequency 200Hz to 800Hz
- Treble +5/-20dB, 6kHz relative to 12 o’clock
- Preamp Output: 100Ω unbalanced 0dBu
- Power Amp: In 20kΩ balanced, 0dBu for Rated Output Power (+14dBu max input)
- Direct Output: 125Ω balanced
- Stereo Aux Input: 3kΩ unbalanced, 10dBV
- Phones: 80mW max, shuts off Direct Output & Speaker Output
- Dimensions: 14” x 10.6” x 2.6” / 355mm x 270mm x 66mm
- Weight: 7 lb / 3.2 kg
SKU: HE0001 -
Bass Amplifiers
HARTKE TX600 AND VX410
- 600-watt Class D bass amplifier that weighs 7lb
- Classic 12AX7 Class A tube preamp circuitry
- Tone stack EQ section including Shape, Frequency, Bass and Treble controls
- Compressor knob controls bass dynamics
- Brite button for increased high frequency attack
- 1/4″ Active and Passive inputs
- 1/8″ Aux input
- 1/8″ headphone output
- Balanced XLR direct output
- Output Mute switch
- Integrated carry handle
- Rugged anodized aluminum chassis
Specifications
- Rated Output Power: 600 watts @ 4 ohms, 450 watts @ 8 ohms
- Frequency Response: 10Hz – 40kHz -1dB
- Preamp: Tube Low Noise 12AX7A High-Mu Twin Triode
- Active Input: >1MΩ unbalanced, -10dBV, -8dBu
- Passive Input: >1MΩ unbalanced, -20dBV, -18dBu
- Compressor Ratio: Fixed 2.1
- Compressor Threshold: Off to -30dBu Passive Input, Off to -20dBu Active Input
- Mute: >80dB (100dB typical) at Direct Output & Speaker Output
- Brite Switch: 10kH, +8dB Gain @ 2 o’clock; +5dB Gain @ min
- Tone Stack EQ
- Bass +8/-14dB, 80 Hz relative to 12 o’clock
- Shape +11/-3dB relative to 12 o’clock
- Frequency 200Hz to 800Hz
- Treble +5/-20dB, 6kHz relative to 12 o’clock
- Preamp Output: 100Ω unbalanced 0dBu
- Power Amp: In 20kΩ balanced, 0dBu for Rated Output Power (+14dBu max input)
- Direct Output: 125Ω balanced
- Stereo Aux Input: 3kΩ unbalanced, 10dBV
- Phones: 80mW max, shuts off Direct Output & Speaker Output
- Dimensions: 14” x 10.6” x 2.6” / 355mm x 270mm x 66mm
- Weight: 7 lb / 3.2 kg
SKU: HE0011 -
Combo
HARTKE VX3500 – Bass Combo
- 3500 amplifier section with 350 watts delivered to its internal 4 ohm speaker system
- Amp section features tube and solid state preamps, bass, treble and contour controls, 10-band graphic EQ and variable compression
- Cabinet features 4 x 10″ traditional paper cone drivers and a high frequency compression driver
- Solid braced cabinet construction, recessed side handles, and heavy duty casters
SKU: HE0012 -
Acoustic Guitar Amplifiers
Laney A1 120W Acoustic Guitar Combo Amp
A POWERFUL, COMPACT ACOUSTIC GUITAR AMP WITH BUILT-IN FEEDBACK ELIMINATION, DELAY AND MORE
Don’t be fooled by its compact size; the Laney A1 is a powerful acoustic amp that comes bursting at the seams with features. It’s designed to fully equip any player for any acoustic gig or studio situation. Easily connect to the desk, pump out plenty of volume without risk of feedback, and even make the most of built-in FX. This is your new acoustic tone workhorse!
XLR DI-out
The XLR-DI out allows you to connect your amplifier to a PA system or recording interface, without the need for mic-ing. A ground lift switch allows you to reduce or remove any unwanted hum due to earth loops.
Feedback Elimination
Anti-Feedback control can be engaged and adjusted to eliminate the body resonance feedback often associated with amplified acoustic guitars at high volume levels. To eliminate body resonance feedback, switch the filter in and adjust the anti-feedback control until the body resonation reduces. You should find a “sweet spot on” the control where any feedback present disappears.
Onboard Digital Delay
The onboard digital effects have been custom designed by Laney. You have a choice of Reverb, Chorus, and Multi FX. Reverb positions have a variety of decay times from Plate through Rooms to Hall. Chorus positions have a various of Lengths/Delays & Multi FX have a different blend of Reverb/Chorus/Delay on each effects option.
Here’s what Laney say:
For the passionate acoustic player who needs an amp that is versatile, compact and powerful, whilst being sympathetic, detailed and delicate, just like an acoustic guitar. Your Guitar, your amp, your tone. The A1 delivers an amplified acoustic performance to match the tone and dynamics of the top-quality acoustic instruments on the market today.
When you need great tone with flexibility the A1 features two completely identical but independent instrument/mic channels. Allowing you to connect two different instruments if you are jamming, a mic and a guitar if you are performing or perhaps the modern trend of two different inputs for the same instrument, to get the most out of your instrument. The A1 sounds amazing and looks great too.
Specifications
- 1×8” woofer, 1” dome tweeter
- Headphone socket
- 120W output
- Pole mount option
- Dedicated acoustic amplifier
- Item dimensions: 342mm x 381mm x 290mm (HWD)
- Carton dimensions: 390mm x 430mm x 338mm (HWD)
- Item weight: 11.80kg
SKU: LY0007 -
Keyboard Amplifier
LANEY AH-150 KEYBOARD COMBO
Features
-
Power: 150W
- 5 Channels: Ch 1: Balanced XLR/Unbalanced Line; Ch 2: Balanced XLR/Hi-Z Instrument; Ch 3 and 4: Stereo Unbalanced Line; and Ch 5: RCA Line input
- Speaker: 1×12 custom with high-frequency horn
- Controls: level, 2-band EQ, volume, level, FX level, delay feedback, delay time, delay level
- Built-in FX loop
- Built-in digital delay
- Aux. input
- Headphone output
- Line in
- Recording output
- Heavy-duty metal grille
- Footswitch sold separately
- Dimensions: 18.89 x 18.5 x 15.51 in.
- Weight: 36.37 lb.
SKU: LY0009 -
-
Electric Guitar Amplifiers
Laney Electric Guitar Amplifier – LV300 Twin
You’ll want your playing to be heard. That’s why we amplify the sound of this beautiful tube driven preamp with a 120 watt output stage, that can deliver into a 4 ohm load, allowing you to connect up to a 4×12 as well as the two internal Super 65 Drivers.
Laney LV-300 Twin Specifications:
Power RMS 120 Watts
Inputs 1x Jack
Channels 3 (Clean, Drive 1 and Drive 2)
Equalisation Independent Bass, Mid, and Treble for Clean and Drive
Bright Switch Yes (Clean Channel)
Reverb Yes, with independent level controls for Clean and Drive
Footswitch Custom 3-Way (Included)
Speaker connections 1x Jack (8 Ohms)
FX Loop(s) Yes
Drivers 2×12″ Celestion
Cabinet Design Chrome corners, rubber handle and rubber feet
Scoop Switch 2 (Drive 1 & Drive 2)
Tube Fusion Techlogy ECC83 Preamp Valve
Headphone Socket No
Weight 22 Kg
Dimensions (mm) 670 x 504 x 285SKU: LY0005 -
Acoustic Guitar Amplifiers
Laney Lead Guitar Combo – LV300
There is nothing quite like the adrenaline rush of playing live! This LV series is dedicated to amplifying that feeling, perfect for your gigging needs take the stage with confidence knowing that your trusty LV is right by your side. Highly durable with a sleek design and above all, huge monster tones, get yours from Nefboton today!
Here’s what Laney say about the Laney LV300 LV Guitar Combo 120 watts
ECC83 LOADED
There’s nothing like the sound of a tube and that’s why the LV300 features a ECC83 placed at just the right point in the signal path for that dynamic response to your playing that only a tube can give. You’ll want your playing to be heard. That’s why we amplify the sound of these beautiful tube driven preamp sections with a 120 watt RMS output stage in the LV300.
The LV300’s front panel is nicely laid-out and feature a clean channel with dedicated EQ, and two Drive channels which share an EQ, but with separate gain and master control for each.
VALVE MOJO
The LV300 features a pre-amp valve – housing Tube Fusion Technology in its hybrid design. Giving you that legendary Valve Mojo to the pre-amp drive tones! Plus another benefit of a hybrid design is a lack of weight – any model in the LV range can be loaded in and out of a car boot or van without fear of injury but is as tough as it needs to be to withstand the rigours of gigging!
V is more to these amps than just being in the word LiVe – each drive channel features a V switch. The V switch gives you an instantly scooped tone. The nice thing is that there is one per channel – giving you flexibility to scoop the rhythm tone whilst leaving the solo tone unaffected. Next comes the VTS switch – this feature globally boosts certain bass and upper mid frequencies whilst cutting some of the lower mid.
Finally, the digital reverb section with individual controls for the clean and the drive channels, a really nice user-friendly feature.
The rear panel of the LV300 features everything you need – simple series effects loops an extension speaker socket and a footswitch socket. Each model in the LV range comes supplied with a sturdy metal FS3 custom three way footswitch!
The LV300 is geared towards live performance. Loud. Stage worthy and refreshingly user friendly. Finished in a tough black tolex with large protective corners the LV300 will look as good as it first did gig after gig.
So when you think LiVe, think LV.
Specifications
- Bright Switch: Yes (Clean Channel)
- Cabinet Design: Rugged plastic corners, rubber handle and rubber feet
- Channels 3 (Clean, Drive 1 and Drive 2)
- Packed Dimensions (HxWxD mm): 520 x 615 x 315
- Drivers: 12″ HH Driver
- Equalisation: Independent Bass, Mid, and Treble for Clean and Drive
- Footswitch: Custom 3-Way (Included)
- FX Loop(s): Yes
- Headphone Socket: No
- Inputs: 1x Jack
- Power: 120 Watts
- Reverb: Yes, with independent level controls for Clean and Drive
- Scoop Switch: 2 (Drive 1 & Drive 2)
- Speaker connections: 1x Jack (8 Ohms)
- Tube Fusion Techlogy: ECC83 Preamp Valve
- Weight: 18.5 Kg packed 17 Kg Unit
- Unit Dims – for int. case (HxWxD mm) 478 x 578 x 258
SKU: LY0006
