Shop By Categories
Newest Arrival
Find the Deal of the Day
Combo, Guitar Effects/Pedals
Marshall Dsl 15c Lead Combo W/PEDAL
Technical Specifications
| SKU: | MA387EL1GMOBTNAFAMZ |
|---|---|
| Colour: | Black |
| Weight (kg): | 16.8 |
| Product Line: | Danik stores |
Description
The DSL15C has 2 Channels, Deep Switch, Tone Shift and Digital Reverb. It’s enclosing is solid and rugged. It weighs exactly 37.04 lbs (or 16.8 kg) so you won’t have problems carrying it with one hand. It is also built like a tank so it’s quite practical to take along to rehearsals and even small gigs. It does cut through a live drummer, if cranked to about 50%.
SKU: LC0001
Accessories, Combo
Marshall dsl40c Lead Combo W/PEDAL
TECHNICAL SPECIFICATION
GENERAL
Model
DSL40CR
Range
DSL
Technology
Valve
Channels
2 (Split) “Ultra gain” and “classic gain”
ELECTRONICS
Output wattage
40W (with power reduction option to 20W)
Outputs
Speaker outputs: 5 x 1/4″ jack sockets (16Ω load / 8Ω load / 4Ω load), 1 x 1/4″ jack emulated line out
Inputs
1 x 1/4″ instrument jack, 1 x 3.5mm jack Aux in MIDI in, footswitch
Controls
Classic gain channel (gain, volume, clean crunch switch), ultra gain channel (gain, volume, OD1/OD2 switch), treble, middle, bass, tone shift switch, presence, resonance, reverb (classic gain channel), reverb (ultra gain channel), master select switch, master volume I, master volume II, loop on/off switch, low power option (on rear)
Effects
Digital reverb
Effects loop
Yes, series, send/return
SPEAKERS
Speaker configuration
1×12″
Speaker model
Celestion V-Type speaker (16Ω, 80w)
Unit impedance
16Ω
VALVES
Preamp valves
4 x ECC83
Power amp valves
2 x EL34
ACCESSORIES
Footswitch
PEDL-90012 included. Compatible with PEDL-91016 modes include: 1 – Clean (classic green) 2 – Crunch (classic red) 3 – OD1 (ultra green) 4 – OD2 (ultra red) 5 – Master 1/Master 2 (toggle) 6 – FX Loop on/off
Cable
Detachable power cable included
Dust cover
M-COVR-00116 (sold separately)
SKU: LC0002
Combo, Guitar Effects/Pedals
MARSHALL MG101CFX LEAD COMBO W/PEDAL
GENERAL
Technology
Solid State
Channels
4 (store and recall)
ELECTRONICS
Output wattage
100W
Outputs
Speaker output: 1 x 1/4″ jack (min. 4Ω load), 1 x 3.5mm jack headphone out
Inputs
1 x 1/4″ jack instrument input, 1 x 3.5mm Aux in (on rear)
Controls
Gain, Clean/crunch, Bass, OD1/OD2, Middle, Treble, Reverb, Volume, FX (Chorus / Phaser / Flanger / Vibe) Tap Delay (Hi-fi / Tape / Multi / Reverse), Ext. FX, Master, Damping (Manual), Store, Tuner
Effects
Reverb, Phaser, Flanger, Vibe, Delay, Chorus
Effects loop
Yes, Send/Return
SPEAKERS
Speaker configuration
1×12″
Unit impedance
4Ω
ACCESSORIES
Footswitch
PEDL-90010 included, PEDL-90008 sold separately
Cable
Detachable power cable included
DIMENSIONS (INCLUDING FEET AND HANDLE)
Weight
22.6kg / 49.8lbs
Width
585 mm / 23″
Height
535 mm / 21.1″
Depth
260 mm / 10.2″
SKU: LC0004
Combo, Guitar Effects/Pedals
MARSHALL MG50CFX LEAD COMBO W/PEDAL
TECHNICAL SPECIFICATION
GENERAL
Technology
Solid State
Channels
4 (store and recall)
ELECTRONICS
Output wattage
50W
Outputs
1 x 3.5mm jack headphone out
Inputs
1 x 1/4″ jack instrument input, 2 x 3.5mm Aux in
Controls
Gain, Clean/Crunch select, Bass, OD1/OD2 select, Middle, Treble, Reverb, Volume, Tuner, Tap Store, FX select, Master volume
Effects
Reverb, Phaser, Flanger, Delay, Chorus
Effects loop
Yes, send/return
SPEAKERS
Speaker configuration
1×12″
Unit impedance
8Ω
ACCESSORIES
Footswitch
PEDL-90010 included, PEDL-90008 sold separately
Cable
Detachable power cable included
DIMENSIONS (INCLUDING FEET AND HANDLE)
Weight
16.6 kg / 37 lbs
Width
520 mm / 20.5″
Height
505 mm / 19.9″
Depth
280 mm / 11″
SKU: LC0006
Combo
MARSHALL MX412A and 4x12DSL100H
The twin-channel DSL100H monster has the same tube complement and feature set as the iconic DSL100, with a few upgrades. Marshall has added a Resonance control as opposed to the original’s fixed Deep switch, so you have total control of how much low end girth you add. The spring reverb has been replaced with studio-quality digital reverb. A rear panel Pentode/Triode switch drops the output to 50W. A two-way footswitch is supplied. This half stack kit is a seriously epic rig.
Features
DSL100H
Power: 100W (tube)
Tubes: three 12AX7 (preamp), one 12AX7, four EL34 (power amp)
Pentode/Triode (half-power) switch
Dual footswitchable channels
Two modes per channel
Controls: 3-band EQ, mid-shift, presence, resonance, reverb
Digital reverb
Footswitch included
Dimensions: 29.1″ x 10.8″ x 9.5″
Weight: 53.3 lb.
MX412A 4×12″ Cab
Power handling: 240W
Speakers: 4×12″ Celestion G12E-60
Slant construction
MDF construction
Dimensions: 30.3″ x 29.7″ x 14.3″
Weight: 64 lb.
SKU: LC0007
Guitar Effects/Pedals
MARSHALL MG100HCFX W/PEDAL
TECHNICAL SPECIFICATION
GENERAL
Technology
Solid State
Channels
4 (store and recall)
ELECTRONICS
Output wattage
100W
Outputs
Speaker output: 1 x 1/4″ jack (min. 4Ω load), 1 x 3.5mm jack headphone out
Inputs
1 x 1/4″ jack instrument input, 1 x 3.5mm Aux in (on rear)
Controls
Gain, Clean/crunch, Bass, OD1/OD2, Middle, Treble, Reverb, Volume, FX (Chorus / Phaser / Flanger / Vibe), Tap, Delay (Hi-fi / Tape / Multi / Reverse), Ext. FX Master, Damping (Manual), Store, Tuner
Effects
Reverb, Phaser, Flanger, Vibe, Delay, Chorus
Effects loop
Yes, Send/Return
ACCESSORIES
Footswitch
PEDL-90010 included, PEDL-90008 sold separately
Cable
Detachable power cable included
DIMENSIONS (INCLUDING FEET AND HANDLE)
Weight
8.8kg / 19.4lbs
Width
585 mm / 23″
Height
255 mm / 10″
Depth
265 mm / 10.4″
SKU: LC0008
Bass Amps
Marshall DSL15H 15W All-Tube Guitar Amp Head & MX412A Guitar Speaker Cabinet
Additional Information
| ASIN | B00JVUOTIE |
|---|---|
| Date First Available | March 8 2017 |
| Manufacturer | GoDpsMusic |
Product description
The Marshall DSL15H 15W guitar amp head is a no-nonsense, mini-brute. It is identical to the DSL15C except it doesn’t feature reverb. It is compact, making it easy easy for the musician on the go. If you want to experience the sheer power of playing through a Marshall 4 x 12″ cab, but are on a budget, then the 240 Watt MX412A is ideal. This Tolex covered, mono-angled cab, featuring the iconic Marshall baffle logo is loaded with Celestion G12E speakers and is compatible with most Marshall heads. For full-on performance, the 100 Watt MG100HCFX will let you perform like a pro while going easy on your pocket. This impressive head is the pinnacle of the MG range. Its front panel features are the same as the MGs from MG50CFX upwards, combining tried-and-tested solid-state tonal circuitry with awesome digital FX.
SKU: LC0009
Bass Amplifiers
HARTKE TX600 – Bass Amplifier
600-watt Class D bass amplifier that weighs 7lb
Classic 12AX7 Class A tube preamp circuitry
Tone stack EQ section including Shape, Frequency, Bass and Treble controls
Compressor knob controls bass dynamics
Brite button for increased high frequency attack
1/4″ Active and Passive inputs
1/8″ Aux input
1/8″ headphone output
Balanced XLR direct output
Output Mute switch
Integrated carry handle
Rugged anodized aluminum chassis
Specifications
Rated Output Power: 600 watts @ 4 ohms, 450 watts @ 8 ohms
Frequency Response: 10Hz – 40kHz -1dB
Preamp: Tube Low Noise 12AX7A High-Mu Twin Triode
Active Input: >1MΩ unbalanced, -10dBV, -8dBu
Passive Input: >1MΩ unbalanced, -20dBV, -18dBu
Compressor Ratio: Fixed 2.1
Compressor Threshold: Off to -30dBu Passive Input, Off to -20dBu Active Input
Mute: >80dB (100dB typical) at Direct Output & Speaker Output
Brite Switch: 10kH, +8dB Gain @ 2 o’clock; +5dB Gain @ min
Tone Stack EQ
Bass +8/-14dB, 80 Hz relative to 12 o’clock
Shape +11/-3dB relative to 12 o’clock
Frequency 200Hz to 800Hz
Treble +5/-20dB, 6kHz relative to 12 o’clock
Preamp Output: 100Ω unbalanced 0dBu
Power Amp: In 20kΩ balanced, 0dBu for Rated Output Power (+14dBu max input)
Direct Output: 125Ω balanced
Stereo Aux Input: 3kΩ unbalanced, 10dBV
Phones: 80mW max, shuts off Direct Output & Speaker Output
Dimensions: 14” x 10.6” x 2.6” / 355mm x 270mm x 66mm
Weight: 7 lb / 3.2 kg
SKU: HE0001
Bass Amplifiers
HARTKE LH1000 – Bass Amplifier
Dual Parallel mode offers 2 x 225 watts at 8 ohms, 2 x 320 watts at 4 ohms, 2 x 545 watts at 2 ohms
Bridge mode offers 750 watts at 8 ohms, 1,100 watts at 4 ohms
Classic 12AX7 Class A tube preamp circuit
Bass and Treble shelving, Mid-peak EQ controls
Selectable Brite and Limiter switch with LED indicator
Balance control blends level of A and B outputs
Front panel balanced XLR direct output
Rear panel 1/4″ Effects loop
1/4″ and Twist & Lock output connectors
2-rackspace metal chassis with steel faceplate and handles
SKU: HE0002
Bass Amplifiers
HARTKE HA2500 BASS AMP AND BASS CABINET 410XL
250 watts at 4 ohms, 180 watts at 8 ohms
Tube-emulation and solid-state preamp circuit
10-band graphic EQ
High Pass and Low Pass contour knobs
Built-in compressor
Active and Passive inputs
Protection relay circuitry
Effects loop Send and Return jacks
Unbalanced 1/4” Speaker Outputs
Balanced Direct Out with Ground Lift and Pre/Post switches
Rugged, roadworthy construction
Dual-Chamber, Dual-Ported Cabinet
Four Hartke XL 10″ Aluminum-Cone Bass Drivers
Power Handling: 400 Watts @ 8 Ohms
Frequency Response: 30 Hz To 5 kHz
Sensitivity: 98 dB @ 1 W/1 M
Voice Coil: 1.5″
Magnet Weight: 60 Oz.
Parallel 1/4″ Inputs
Dimensions: 24″(H) X 24″(W) X 15″(D)
Weight: 88 lb.
SKU: HE0004
Bass Amplifiers
HARTKE HD150 – Bass Combo
150 watts of output power
15″ HyDrive paper and aluminum cone driver
1″ tweeter
Top-mounted amplifier with Volume, Bass, Mid and Treble controls
7-band graphic EQ
1⁄4″ input for active and passive bass guitars
1/8″ stereo Aux input for stereo line level devices (MP3 players, drum machines, etc.)
1⁄4″ headphone output
XLR direct output
Built-in limiter
Effects loop
Perforated metal grille
Side carry handles
Casters included
SKU: HE0005
Bass Amps, Combo
HARTKE HD508,500WATT , BASS COMBO
Lightweight Class D combo amplifier that weighs 35lb
500 watts of power
Two 10″ HyDrive paper/aluminum hybrid cone drivers
Neodymium magnets
Top-mounted control panel
Hartke‘s Shape EQ knob with variable filter
3-band (Bass, Mid, Treble) EQ
XLR direct output
1/8″ stereo Aux input
1⁄4″ headphone output
1⁄4″ bass input
Effects loop
Perforated steel grille
Molded strap carry handle
SKU: HE0006
Bass Amps, Combo
HARTKE HD500 – Bass Combo
Lightweight Class D combo amplifier that weighs 35lb
500 watts of power
Two 10″ HyDrive paper/aluminum hybrid cone drivers
Neodymium magnets
Top-mounted control panel
Hartke‘s Shape EQ knob with variable filter
3-band (Bass, Mid, Treble) EQ
XLR direct output
1/8″ stereo Aux input
1⁄4″ headphone output
1⁄4″ bass input
Effects loop
Perforated steel grille
Molded strap carry handle
SKU: HE0007
Bass Amplifiers
HARTKE 4.5XL – Bass Cabinet HA5500 AMP
“Expanded-Design” Tuned, Ported Cabinet
Custom Hartke 5″ Aluminum-Cone High-Frequency Driver
Four Hartke XL 10″ Aluminum-Cone Bass Drivers
Power Handling: 400 Watts @ 8 Ohms
Frequency Response: 30 Hz To 12 kHz
Sensitivity: 99 dB @ 1 W/1 M
Voice Coil: 1.5″
Magnet Weight: 60 Oz.
Parallel 1/4″ Inputs
Dimensions: 27″(H) X 24″(W) X 18″(D)
Weight: 99 lb.
500 Watts of power at 4 ohms
Tube and solid state preamp sections
Passive and active input sections
Bass, treble, and contour controls
10-band graphic EQ
Variable compression
XLR direct out
Effects loop
Rack Ears included
SKU: HE0008
Bass Amplifiers
HARTKE LH500 – Bass Amplifier
500 watts of power @ 4 ohms
Classic 12AX7 High Voltage Class-A tube preamp circuit
Bass and Treble Shelving, plus mid-peak EQ controls
Selectable Brite switch for added high frequency response
Selectable limiter switch with LED indicator
Front panel XLR balanced direct output
Rear panel 1/4″ effects loop
1/4″ output connectors
2-rackspace metal chassis with steel faceplate and handles
SKU: HE0009
Bass Amplifiers
HARTKE TX300AMP AND HX112 – Bass Amplifier
300-watt Class D bass amplifier that weighs 5lb
Drive circuit for added distortion effect
Variable compressor for increased dynamic control
3-band EQ with Shape control
1/4″ Instrument input
1/8″ (3.5mm) Aux input
1/8″ (3.5mm) Headphone output
Balanced XLR direct output
Output Mute switch
Rugged anodized aluminum chassis
SKU: HE0010
Bass Amplifiers
HARTKE TX600 AND VX410
600-watt Class D bass amplifier that weighs 7lb
Classic 12AX7 Class A tube preamp circuitry
Tone stack EQ section including Shape, Frequency, Bass and Treble controls
Compressor knob controls bass dynamics
Brite button for increased high frequency attack
1/4″ Active and Passive inputs
1/8″ Aux input
1/8″ headphone output
Balanced XLR direct output
Output Mute switch
Integrated carry handle
Rugged anodized aluminum chassis
Specifications
Rated Output Power: 600 watts @ 4 ohms, 450 watts @ 8 ohms
Frequency Response: 10Hz – 40kHz -1dB
Preamp: Tube Low Noise 12AX7A High-Mu Twin Triode
Active Input: >1MΩ unbalanced, -10dBV, -8dBu
Passive Input: >1MΩ unbalanced, -20dBV, -18dBu
Compressor Ratio: Fixed 2.1
Compressor Threshold: Off to -30dBu Passive Input, Off to -20dBu Active Input
Mute: >80dB (100dB typical) at Direct Output & Speaker Output
Brite Switch: 10kH, +8dB Gain @ 2 o’clock; +5dB Gain @ min
Tone Stack EQ
Bass +8/-14dB, 80 Hz relative to 12 o’clock
Shape +11/-3dB relative to 12 o’clock
Frequency 200Hz to 800Hz
Treble +5/-20dB, 6kHz relative to 12 o’clock
Preamp Output: 100Ω unbalanced 0dBu
Power Amp: In 20kΩ balanced, 0dBu for Rated Output Power (+14dBu max input)
Direct Output: 125Ω balanced
Stereo Aux Input: 3kΩ unbalanced, 10dBV
Phones: 80mW max, shuts off Direct Output & Speaker Output
Dimensions: 14” x 10.6” x 2.6” / 355mm x 270mm x 66mm
Weight: 7 lb / 3.2 kg
SKU: HE0011
Featured Categories
-
Accessories, Combo
Marshall dsl40c Lead Combo W/PEDAL
TECHNICAL SPECIFICATION
GENERAL
ModelDSL40CRRangeDSLTechnologyValveChannels2 (Split) “Ultra gain” and “classic gain”ELECTRONICS
Output wattage40W (with power reduction option to 20W)OutputsSpeaker outputs: 5 x 1/4″ jack sockets (16Ω load / 8Ω load / 4Ω load), 1 x 1/4″ jack emulated line outInputs1 x 1/4″ instrument jack, 1 x 3.5mm jack Aux in MIDI in, footswitchControlsClassic gain channel (gain, volume, clean crunch switch), ultra gain channel (gain, volume, OD1/OD2 switch), treble, middle, bass, tone shift switch, presence, resonance, reverb (classic gain channel), reverb (ultra gain channel), master select switch, master volume I, master volume II, loop on/off switch, low power option (on rear)EffectsDigital reverbEffects loopYes, series, send/returnSPEAKERS
Speaker configuration1×12″Speaker modelCelestion V-Type speaker (16Ω, 80w)Unit impedance16ΩVALVES
Preamp valves4 x ECC83Power amp valves2 x EL34ACCESSORIES
FootswitchPEDL-90012 included. Compatible with PEDL-91016 modes include: 1 – Clean (classic green) 2 – Crunch (classic red) 3 – OD1 (ultra green) 4 – OD2 (ultra red) 5 – Master 1/Master 2 (toggle) 6 – FX Loop on/offCableDetachable power cable includedDust coverM-COVR-00116 (sold separately)SKU: LC0002 -
Combo
HARTKE Kickback KB15 – Bass Combo 120WATTS
- Lightweight Class D amplifier that weighs 35lb
- 500 watts of power
- 15″ HyDrive paper/aluminum hybrid cone driver
- Neodymium magnets
- 2-way (upright and “kickback”) cabinet design
- Unique Shape EQ knob with variable filter
- Full 3-band EQ
- XLR direct output
- 1⁄4″ headphone output
- 1⁄4″ passive/active bass input
- Perforated steel grille
- Molded strap carry handle
SKU: HE0015 -
Keyboards
KURZWEIL M1 STAND M1 SR GRAND PIANO
SPECS
All specifications subject to change without notice.
Keyboard: 88 Note fully weighted, graded-hammer action with adjustable touch sensitive keys (LK-40 GH) Keyboard Sensitivity: 10 selectable response levels Display: Scrolling alphanumeric LED Polyphony: 64 voice Preset Programs: 20 Expressive sounds including award winning Triple Strike Grand Piano, all taken from the PC3 User Presets: 3, one-touch recallable “favorites”, providing quick access to customized selections. General MIDI: No Splits/Layers: Quick Split/Layer, easy access with adjustable relative volume Transpose: Full transposition to any key, +/- two octaves Tune: Adjust by Cents (+/- 100 cents) Effects: Dual ambience and effect processors (reverberation and chorus). Rich and complex effects from the PC3 Series Drum Patterns: 29 pre-recorded interactive patterns in a variety of styles Metronome: Yes Recorder/Sequencer: 1-Track; 4 Song capacity Sound System: 15-watt, 2-speaker stereo sound system Audio Outs: Stereo left/right RCA line outs (for connecting to external amplification) Audio Ins: Stereo left/right RCA line ins (for connecting external sound sources) (1) 1/8″ stereo MP3 IN
Headphones: (2) 1/4″ stereo headphone outs MIDI I/O: MIDI In and Out connectors USB: (1) port; “Plug and Play” USB functionality allows MIDI over USB for connecting to/from an external computer sequencer; no software driver needed Pedals: (3) built-in switch-type: sustain, sostenuto, soft Finishes: Simulated Rosewood & White Bench: Matching bench included Dimensions: 33″(H) x 55.4″ (W) x 16.3″ (D) 83.8 cm (H) x 140.8 cm (W) x 41.4 cm (D)
Weight: 107.25 lb / 48.65 Kg Power: DC 15V 2.5A external power supply SKU: KK0002 -
Grand Piano, Keyboards
KURZWEIL MPS10 MP10 STAND
SPECS
All specifications subject to change without notice.
Keyboard: 88 Note, Fully-Weighted,Hammer-Action Keyboard MPS10: LK-40L
MPS10F: Fatar TP/40LKeyboard Sensitivity: 10 selectable response levels Display: Scrolling 2-character, dot-matrix LED Polyphony: 64 note Preset Programs: 88 Expressive sounds including award winning Triple Strike Grand Piano, all taken from the PC3. User Presets: 3, one-touch recallable “favorites”, providing quick access to customized selections. General MIDI: No Splits/Layers: Quick Split/Layer, easy access with adjustable relative volume Transpose: Full transposition to any key, +/- two octaves Tune: Adjust by Cents (+/- 100 cents) Effects: Dual ambience and effect processors (reverberation and chorus). Rich and complex effects from the PC3 Series. Drum Patterns: 78 pre-recorded interactive patterns in a variety of styles (incl. metronome) Recorder/Sequencer: 1-Track; 9 song capacity. Demo Songs: 51 classic piano demonstration songs Sound System: Amplifier: 2×10 Watts RMS at 1% THD; 30 watts maximum total power Speakers: 2 full-range speaker stereo sound system.
Audio Outs: Stereo left/right 1/4″ line outs (for connecting to external amplification) Audio Ins: Stereo left/right 1/4″ line ins (for connecting external sound sources) Headphones: (2) 1/4″ stereo headphone outs MIDI I/O: MIDI over USB (see below) USB: (1) port; “Plug and Play” USB functionality allows MIDI over USB for connecting to/from an external computer sequencer; no software driver needed Pedals: (1) dual switch-type jack (single switch-pedal included) Finishes: Dark Gray Stand: Matching stand optional Bench: Sold separately Included Accessories:: Power cable, Switch pedal Dimensions: Instrument: 3.54in(H) x 51.22in(L) x 14.17in(D) 9.0cm(H) x 130.1cm(L) x 36.0cm(D)
Stand (optional): 26.02in(H) x 51.22in(L) x 13.78in(D)
66.1cm(H) x 130.1cm(L) x 35.0cm(D)
Weight: 39.7 lb / 18.3 Kg Power: 15 VDC, 2.5A, 100-240VAC external power adaptor (incl.) SKU: KK0005
Recommendation For You
View All Recommendations-
Accessories, Combo
Marshall dsl40c Lead Combo W/PEDAL
TECHNICAL SPECIFICATION
GENERAL
ModelDSL40CRRangeDSLTechnologyValveChannels2 (Split) “Ultra gain” and “classic gain”ELECTRONICS
Output wattage40W (with power reduction option to 20W)OutputsSpeaker outputs: 5 x 1/4″ jack sockets (16Ω load / 8Ω load / 4Ω load), 1 x 1/4″ jack emulated line outInputs1 x 1/4″ instrument jack, 1 x 3.5mm jack Aux in MIDI in, footswitchControlsClassic gain channel (gain, volume, clean crunch switch), ultra gain channel (gain, volume, OD1/OD2 switch), treble, middle, bass, tone shift switch, presence, resonance, reverb (classic gain channel), reverb (ultra gain channel), master select switch, master volume I, master volume II, loop on/off switch, low power option (on rear)EffectsDigital reverbEffects loopYes, series, send/returnSPEAKERS
Speaker configuration1×12″Speaker modelCelestion V-Type speaker (16Ω, 80w)Unit impedance16ΩVALVES
Preamp valves4 x ECC83Power amp valves2 x EL34ACCESSORIES
FootswitchPEDL-90012 included. Compatible with PEDL-91016 modes include: 1 – Clean (classic green) 2 – Crunch (classic red) 3 – OD1 (ultra green) 4 – OD2 (ultra red) 5 – Master 1/Master 2 (toggle) 6 – FX Loop on/offCableDetachable power cable includedDust coverM-COVR-00116 (sold separately)SKU: LC0002 -
Combo
HARTKE Kickback KB15 – Bass Combo 120WATTS
- Lightweight Class D amplifier that weighs 35lb
- 500 watts of power
- 15″ HyDrive paper/aluminum hybrid cone driver
- Neodymium magnets
- 2-way (upright and “kickback”) cabinet design
- Unique Shape EQ knob with variable filter
- Full 3-band EQ
- XLR direct output
- 1⁄4″ headphone output
- 1⁄4″ passive/active bass input
- Perforated steel grille
- Molded strap carry handle
SKU: HE0015 -
Keyboards
KURZWEIL M1 STAND M1 SR GRAND PIANO
SPECS
All specifications subject to change without notice.
Keyboard: 88 Note fully weighted, graded-hammer action with adjustable touch sensitive keys (LK-40 GH) Keyboard Sensitivity: 10 selectable response levels Display: Scrolling alphanumeric LED Polyphony: 64 voice Preset Programs: 20 Expressive sounds including award winning Triple Strike Grand Piano, all taken from the PC3 User Presets: 3, one-touch recallable “favorites”, providing quick access to customized selections. General MIDI: No Splits/Layers: Quick Split/Layer, easy access with adjustable relative volume Transpose: Full transposition to any key, +/- two octaves Tune: Adjust by Cents (+/- 100 cents) Effects: Dual ambience and effect processors (reverberation and chorus). Rich and complex effects from the PC3 Series Drum Patterns: 29 pre-recorded interactive patterns in a variety of styles Metronome: Yes Recorder/Sequencer: 1-Track; 4 Song capacity Sound System: 15-watt, 2-speaker stereo sound system Audio Outs: Stereo left/right RCA line outs (for connecting to external amplification) Audio Ins: Stereo left/right RCA line ins (for connecting external sound sources) (1) 1/8″ stereo MP3 IN
Headphones: (2) 1/4″ stereo headphone outs MIDI I/O: MIDI In and Out connectors USB: (1) port; “Plug and Play” USB functionality allows MIDI over USB for connecting to/from an external computer sequencer; no software driver needed Pedals: (3) built-in switch-type: sustain, sostenuto, soft Finishes: Simulated Rosewood & White Bench: Matching bench included Dimensions: 33″(H) x 55.4″ (W) x 16.3″ (D) 83.8 cm (H) x 140.8 cm (W) x 41.4 cm (D)
Weight: 107.25 lb / 48.65 Kg Power: DC 15V 2.5A external power supply SKU: KK0002 -
Grand Piano, Keyboards
KURZWEIL MPS10 MP10 STAND
SPECS
All specifications subject to change without notice.
Keyboard: 88 Note, Fully-Weighted,Hammer-Action Keyboard MPS10: LK-40L
MPS10F: Fatar TP/40LKeyboard Sensitivity: 10 selectable response levels Display: Scrolling 2-character, dot-matrix LED Polyphony: 64 note Preset Programs: 88 Expressive sounds including award winning Triple Strike Grand Piano, all taken from the PC3. User Presets: 3, one-touch recallable “favorites”, providing quick access to customized selections. General MIDI: No Splits/Layers: Quick Split/Layer, easy access with adjustable relative volume Transpose: Full transposition to any key, +/- two octaves Tune: Adjust by Cents (+/- 100 cents) Effects: Dual ambience and effect processors (reverberation and chorus). Rich and complex effects from the PC3 Series. Drum Patterns: 78 pre-recorded interactive patterns in a variety of styles (incl. metronome) Recorder/Sequencer: 1-Track; 9 song capacity. Demo Songs: 51 classic piano demonstration songs Sound System: Amplifier: 2×10 Watts RMS at 1% THD; 30 watts maximum total power Speakers: 2 full-range speaker stereo sound system.
Audio Outs: Stereo left/right 1/4″ line outs (for connecting to external amplification) Audio Ins: Stereo left/right 1/4″ line ins (for connecting external sound sources) Headphones: (2) 1/4″ stereo headphone outs MIDI I/O: MIDI over USB (see below) USB: (1) port; “Plug and Play” USB functionality allows MIDI over USB for connecting to/from an external computer sequencer; no software driver needed Pedals: (1) dual switch-type jack (single switch-pedal included) Finishes: Dark Gray Stand: Matching stand optional Bench: Sold separately Included Accessories:: Power cable, Switch pedal Dimensions: Instrument: 3.54in(H) x 51.22in(L) x 14.17in(D) 9.0cm(H) x 130.1cm(L) x 36.0cm(D)
Stand (optional): 26.02in(H) x 51.22in(L) x 13.78in(D)
66.1cm(H) x 130.1cm(L) x 35.0cm(D)
Weight: 39.7 lb / 18.3 Kg Power: 15 VDC, 2.5A, 100-240VAC external power adaptor (incl.) SKU: KK0005
